USED BAND SAWS & OTHER MANUFACTURING MACHINERY

In addition to providing repair services for the band saws in your shop, we also sell used machines looking for a new home. We offer used band saws, grinders, presses, and other types of saws from a variety of different manufacturers. From manual operation to automatic saw machines, you might just find the exact piece you have been searching for. All machines we list are thoroughly inspected and will not leave our shop until they receive our stamp of approval.

Check back often as our inventory rotates frequently. For more information about any of our listings, call our office at 612.500.8088. We would be more than happy to answer your questions.

Have a machine you just can’t stand to look at anymore? Let us know. Maybe we can make a deal! Most of our customers are located in Minnesota, Iowa, Wisconsin, North Dakota, and South Dakota, but feel free to contact us no matter where you’re located.

MANUFACTURERS
CONTACT US

NEW – PAT MOONEY PMI-20 $12,900.00

FEATURES

Double Miter – 45 degrees to the left and right

2800 RPM Saw Blade Speed

Full Control of the Feed Rate – Air over Oil Feed System

Vertical and Horizontal Clamping

Adjustable Clamping Pressure

Capacity Specifications
CapacityWidth
Height
11″5.9″
Technical Specifications
BLADE SIZE20″
BLADE SPEED2,800 rpm
Blade Drive7.5 HP Motor

ELUMATEC SA73/35 $9,995.00

FEATURES

Suitable for high-volume cutting of aluminum profiles for window manufacturing and industrial applications
Material infeed (cycling) protects the surface of the workpiece by means of a single-stage profile lifting system
One, two or three-stroke feed can be selected using a selector switch
Reliable material feed using two horizontal clamping cylinders
Automatic machine shut-down at the end of the profile

Capacity Specifications
CapacityWidth
Height
150mm110mm
Technical Specifications
BLADE SIZE380mm
BLADE SPEED2,800 rpm
Length1,500 mm length, 1,100 mm depth, 1,550 mm height
FEED DISTANCE PER CYCLE5-250 mm (up to three cycles possible)

SCOTCHMAN 350LT/PK/PD $CALL FOR PRICING

FEATURES

Semi-automatic cycle cutting, with pneumatic power down feed and electric controls. Air operated power double self-centering vise ensures your parts come burr-free.

Miter locking device gives your quick, accurate stops at 45° left, 90° straight, or 45° right.

12-1/2″ diameter blade gives you the range to cut larger materials, using the 7 gallon coolant tank to keep your parts cool and to help get the most out of your blade.

High and low cutting speeds (22 rpm/ 44rpm) allow for a range of materials this saw can process.

Capacity Specifications
Capacity at 90°Capacity at 45°
Round Tubing4-1/2″ (114 mm)4″ (102 mm)
Square Tubing4-1/4″ x 4-1/4″ (108 x 108 mm)4″ x 4″ (102 x 102 mm)
Rectangle Tubing5-1/2″ x 4″ (140 x 102 mm)4″ x 4″ (102 x 102 mm)
Round Solid2″ (51 mm)1-3/4″ (44 mm)
Square Solid2″ x 2″ (51 x 51 mm)1-3/4″ x 1-3/4″ (44 x 44 mm)
Technical Specifications
MAXIMUM DIAMETER BLADE350 mm
WIDTH X DEPTH X HEIGHT21-7/8″ x 43-1/2″ x 56-1/4″ (not including handle)
MACHINE WEIGHT760 lbs.
MOTOR230 volt, 3 phase, 3 hp.

TIGERSTOP, MULTIPLE MODELS AVAILABLE CALL FOR PRICE

FEATURES

Adding a TigerStop to an existing machinery means faster processing, so you can output more finished parts a day. Just punch in or download your parts list, and the stop will move to position. Simply place your material and cut.

The TigerStop is amazingly accurate giving you perfectly cut parts…every time. This saves on costly rework and reduces labor costs.

TigerStop’s interface is easy to use and an operator can be trained in as little as ten minutes. Once trained, station set up time goes to zero for even more cost savings.

A TigerStop system is easy to upgrade; start simple and build your TigerStop system as you grow. Add label printer, dynamic optimization, parts list downloading, and much more.

BENEFITS

TigerStop® quickly positions to your desired length and cuts within +/- .004 in (.10mm) every time. The part you cut today, will be the same as the part you cut tomorrow.

With TigerStop® you can say “Goodbye” to rework! Parts are cut accurately the first time around so you won’t waste time fixing errors. TigerStop enables your newest operator to perform like a seasoned sawyer.

TigerStop® can be fitted to any machine tool where accuracy and repeatability are required. This includes, chop saws, upcut saws, table saws, drills, ironworkers, press brakes, you name it.

The TigerStop system offers a payback like no other. Most users find that their TigerStop® pays for itself in a matter of months.

WELLSAW V20 $3,995.00

FEATURES

This dependable vertical contour saw has a 20″ throat with 16″ under the guide, an innovative final drive to increase the life span, a two speed gearbox, all wrapped in powder coated sheet metal.

The Wellsaw V20 comes standard with a heavy tube steel frame, a replaceable throat plate, blade speed and tension indicators, a removable chip tray, and many more features.

Capacity Specifications
Throat Capacity20″ Deep
Table to Guide Capacity16″ High
Blade Size3/16″ through 3/4″
Low Range Blade Speed45-400 SFPM
High Range Blade Speed325-3000 SFPM
Blade GuidesSealed Ball Bearings with 90° rotation feature.
Table Size26″ x 26″ Cast Iron
Tilt5° Inside and 45° Outside
Drive Motor3HP, 3PH, 208v
Dimemsions38″ Wide, 48″ Long, 83-1/2″ High
Shipping Weight950 lbs.

PREVIOUSLY SOLD MACHINES

MARVEL 380A-PC60 $39,995 SOLD

FEATURES

5 H.P. electric blade drive with sensor-less vector control for smooth acceleration and full torque. Infinitely variable speed range: 60-400 fpm (18-122m/minute). Blade speed can be automatically set when material is selected.

For miter cutting up to 60° left and right, this machine has a tilting column. Variable speed, inverter driven, electronic tilt – Includes encoder feedback and touch screen display & control, for precision miter positioning. Electrically powered, chain driven, with encoder feedback and a Marvel PC3 controller.

0°-3° Canted Column allows for adjustment of up to 3 degrees for your forward approach angle, for notching, or increased efficiency in cutting of structural materials. Must specify if 0° or 3° column set up is desired as the machines are default shipped from the factory in 3° Canted Column.

The direct force sensing electric ball screw feed combines more consistent feed force with greater control, 0-300 lbs (0-1335 N), column travels on re-circulating linear ball ways. Feed pressure can be automatically set when material is selected.

The Marvel PC3 Programmable Controller provides a programmable logic control unity with a 9″ color touch screen display. The controller features graphical part programming, material selection chart, blade speed and feed force control, and job programming.

Capacity Specifications
Capacity 0° CantRectangles
Rounds
Nominal15″ x 20″ (381 mm x 508 mm)15″ (381 mm)
Blade at 45°15″ x 14″ (381 mm x 355 mm)14″ (355 mm)
Blade at 60°15″ x 9.25″ (381 mm x 235 mm9.25″ (235 mm)
Blade at -45°15″ x 13.25″ (381 mm x 336 mm)13.25″ (336 mm)
Blade at -60°15″ x 8″ (381 mm x 203 mm)8″ (203 mm)
Capacity 3° CantRectanglesRounds
Nominal14.5″ x 20″ (368 mm x 508 mm) 14.5″ x 20″ (368 mm x 508 mm)
Blade at 45° Cant
14.5″ x 13.5″ (368 mm x 343 mm)13.5″ (343 mm)
Blade at 60° Cant13.5″ (343 mm)8.75″ (222 mm)
Blade at -45° Cant14.5″ x 12.75″ (368 mm x 324 mm)12.75″ (324 mm)
Blade at -60° Cant14.5″ x 7.75″ (368 mm x 197 mm)7.75″ (197 mm)
Technical Specifications
BLADE SIZE16′ (4877 mm) long x 1.25″ (32 mm) wide x .042″ (1.07 mm).
BLADE SPEED60-400 fpm (18-122 m/min)
WEIGHT CAPACITY500 lbs./foot, up to a maximum of 7,000 lbs and 1,200 lbs evenly distributed on the machine table. Table height is 40”.
MOTORSMain Drive: 5 H.P., Coolant Pump: 1/8 H.P., Hydraulic Pump: 2 H.P.
BAR FEED SPECIFICATIONSLength: 48″, Speed: 33 inches/minute – 70 feet/minute
MACHINE WEIGHT5,900 lbs.

MARVEL MSIW60D $14,900.00 SOLD

FEATURES

Dual Cylinder operation allows for two operators to produce parts simultaneously on opposite sides of the machine.

A 60 ton capacity allows for a wide range of flat bar, angle, and bar shearing as well as notching.

The 10″ throat depth gives you plenty of space to work those hard-to-reach holes and notches, and produce the part you need in the shortest amount of time.

Internal lighting makes seeing the material you’re working a breeze. Never squint your eyes trying to see material again.

Capacity Specifications
Punching
Pressure60 tons
Standard Tooling1-1/2″ x 3/8″
Throat Depth10″
Stroke Length2-5/16″
Cycles/Minute (3/4″)25
Work Height40-9/16″
Flat Bar Shearing
Width and Thickness11-3/4″ x 9/16″
Work Height44-1/2″
Angle Shear
90°4-3/4″ x 4-3/4″ x 1/2″
45°2-3/4″ x 2-3/4″ x 3/8″
Work Height44-1/2″
Bar Shearing
Round Bar1-1/2″
Square Bar1-1/2″ x 1-1/2″
Work Height44-1/2″
Notching
Rectangular Notcher1-3/4″ x 3-9/16″ x 3/8″
Work Height35-1/2″

MARVEL 81A11PC $14,995.00 SOLD

FEATURES

10′ Shuttle feed table

Hydraulically powered blade guide arm Hydraulic blade tension

Programmable control-micro processor control unit with dual alpha-numberic display and operator keypad for 1) setting cut-off lengths up to 24″ per single index or longer using multi-cycle feature, and 2) presetting number of pieces to be cut.

Inch/metric capability.

Memory feature permits storing preset cut-off and number of pieces for up to 99 jobs.

Includes out-of-stock shut down device.

Capacity Specifications
CapacityRectangular
90°18″ x 20″
45° (Left)18″ x 11.5″
90°18″ x 13.5″
Technical Specifications
BLADE SIZE14′ 6″ x 1-1/4″ x .042″
BLADE SPEEDSInfinitely variable: 60 to 400 FPM
MAIN MOTOR10 HP
FEED LENGTH24″ per stroke
FEED CAPACITYUp to 300 lbs.

MARVEL PHOENIX PA-10 $7,900.00 SOLD

FEATURES

Auto foot control down feed for fast approach
This machine can be viewed under power.
This is a very heavy-duty bandsaw, fully automatic.  It is fully functional.
Hydraulic Vises
Manually adjusted bar-feed, automatic function

Capacity Specifications
CapacityRectangularRound
90°8″ x 12″10”
Technical Specifications
BLADE SIZE1″ x 11′ 6″
BLADE DRIVE3 HP
HYDRAULIC MOTOR1 HP
COOLANT PUMP1/8 HP

HYD-MECH S-20A HORIZONTAL BANDSAW $14,000.00 SOLD

FEATURES

Overhead bundling vises
Variable vise pressure
Blade breakage switch
Out of stock switch.
Very clean machine

Capacity Specifications
CapacityRectangularRound
90°13″ x 18″13”
45°13″ x 10-3/4″12”
Technical Specifications
BLADE SIZE1″ x 13′ 6″
BLADE DRIVE5 HP
MACHINE VOLTAGE240v
BLADE SPEED75-350 SFM
COOLANT TANK CAPACITY12 Gallons
WORK LOAD5,000 lbs.
MACHINE WEIGHT3,400 lbs.
TABLE HEIGHT31”
DIMENSIONS (W x L x H)93″ x 86″ x 52″

MARVEL 2125A-PC60 AUTOMATIC VERTICAL BANDSAW $46,900.00 SOLD

Specifications
CUTTING CAPACITY (NOMINAL)20″ x 25″
CUTTING CAPACITY (45°)20″ x 17″
CUTTING CAPACITY (60°)20″ x 11.25″
ROUND CAPACITY20″
BLADE210″ x 1.25″ x .042″
SPEED RANGE30 FPM – 650 FPM
POWER TILT+/- 60°
SHUTTLE PULL24″ Single, 1000″ Multi-Cycle Max
TABLE HEIGHT38″

HYD-MECH M-16A HORIZONTAL BANDSAW $29,500.00 SOLD

FEATURES

33″ Stroke Bar feed, Automatic, Multi-index capable
Mist and Flood blade lubrication selection with washdown hose
Overhead bundling vises
Full capacity, Full stroke hydraulic vises
Steel guide arms mounted on linear rails. Hydraulically powered guide arm is adjustable for proper spacing.
Retrofitted with 7.5 HP VFD direct blade drive.
Hydraulic positive down feed
Blade chamber separates material from cut part
Cast iron band wheels
Automatic PLC control
Replaceable blade brush
Robust steel base
Automatic chip removal auger
Easy access electrical panel and hydraulics
Blade break switch
Hardened replaceable wear plates on material vises
Hydraulic band tension
Hydraulic carbide guide tension
Safety door interlocks
Out of stock switch
Work light

Capacity Specifications
CapacityRectangularRound
90°16” x 25”16”
45°16” x 15”16”
30°16” x 9”11”
Technical Specifications
BLADE SIZE1 1/4″ x 18′ 6″
BLADE DRIVE7.5 HP VFD
MACHINE VOLTAGE208, 240, 480, or 575 v
BLADE SPEED50-350 SFM
COOLANT TANK CAPACITY9 Gallons
WORK LOAD8,000 lbs.
MACHINE WEIGHT7,400 lbs.
TABLE HEIGHT32”
DIMENSIONS (W x L x H)132” x 90” x 66”

saw blades & parts

repair services

new & used machines

CONTACT US TODAY

LET US HELP YOU