• Speed Range: 50 – 200 RPM controlled through an Inverter Drive.
• Blade Guides: Four carbide inserts provide additional support for the blade, allowing for the use of thinner blades, reducing kerf loss.
• Vises: Machine vises clamp the material from the sides as well as vertically. The floating shuttle vise retracts the material as the saw blade returns, preventing contact as the blades return to the start position.
• Chip Brush: The chip brush assures chips are removed from the gullet of the blade providing straighter cuts and longer blade life.
• Automatic Shuttle Vise: The shuttle vise is servo driven through a ball screw and will index from 5/16” to 23-5/8” in a single shuttle. Shuttle lengths up to 118-1/8” (3000mm) can be achieved via multi-index with the shuttle traveling at 65 ft/min. The shuttle table includes an automatic lubrication system. The shuttle vise floats in three steps to accommodate crooked stock.
• Loading Table: The 16’ 5” (5 Meter) automatic loading table allows for storage of round bar stock and fully automatic feeding of the same. The bar stock is lifted piece by piece and fed into the saw. Table weight capacity is 7,400 lbs.
• Hydraulic Automatic Sorting Chute: The sorting chute automatically directs the trim cut and remnant away from good cut pieces.
