Marvel PB360 - TS3 Machine | Saws, Services, Sales, & Repairs

CAPACITY: 90°	14” x 14” rectangle (360 x 360 mm), 13” round (360mm)
SPEED RANGE	70 – 330 SFPM (21 – 101m/min) infinitely variable through a frequency inverter drive and heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. A read out at the operator’s touch screen assures accurate speed setting.
BLADE	1-1/4” x .042” x 14’6” (34 x 1.1 x 4420 mm)
MOTORS	Blade Drive: 5 H.P. (3.75 kW)-Inverter Drive, Hydraulic Pump Motor: 2 H.P. (.75 kW), Coolant Pump Motor: 1/8 H.P. (0.09 kW). (All motors are dual voltage, 230/460 volts, 3 ph. 60 Hz. 208 volt conversion is available for an added charge.)
MACHINE WEIGHT	3,650 lbs (1650 kg)

CAPACITY: 90°

14” x 14” rectangle (360 x 360 mm), 13” round (360mm)

SPEED RANGE

70 – 330 SFPM (21 – 101m/min) infinitely variable through a frequency inverter drive and heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. A read out at the operator’s touch screen assures accurate speed setting.

BLADE

1-1/4” x .042” x 14’6” (34 x 1.1 x 4420 mm)

MOTORS

Blade Drive: 5 H.P. (3.75 kW)-Inverter Drive, Hydraulic Pump Motor: 2 H.P. (.75 kW), Coolant Pump Motor: 1/8 H.P. (0.09 kW). (All motors are dual voltage, 230/460 volts, 3 ph. 60 Hz. 208 volt conversion is available for an added charge.)

MACHINE WEIGHT

3,650 lbs (1650 kg)

HYDRAULIC DOWN FEED

Feed rate and Feed pressure can be controlled independently for fast, accurate cutting. Setup is simplified through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both controls are located at the operator’s station.

VISE JAWS

The 1 Set of Hydraulic jaws are split. The split vise jaws also help to reduce burrs left on the material and are ideal for bundle cutting. Holding the work piece on both sides of the blade reduces blade vibration, providing more accurate cuts and longer blade life.

AUTOMATIC CHIP REMOVAL

The chip auger rotating in the coolant return removes chips quickly and efficiently, freeing the operator to perform more productive operations. Coolant is allowed to drain back to the tank before the chips are removed from the machine.

WORK LIGHT

Positioned directly over the work area to provide better illumination of the cutting area, the work light can be turned on and off independently from the operator’s control panel.

Marvel

PB360 Horizontal Post Style Saw

PB360

CAPACITY: 14″ x 14″ Rectangle

FINANCING AVAILABLE!

high speed, heavy duty, horizontal sawing, with the PB360

PB360

PRODUCT SPECIFICATIONS

HYDRAULIC DOWN FEED

VISE JAWS

AUTOMATIC CHIP REMOVAL

WORK LIGHT

CONTACT US TODAY