Marvel
S330/2/HV
HORIZONTAL MITERING SAW
FINANCING AVAILABLE!
enable your production to have double mitering, with the S330/2/HV
• Speed Range: 60 – 3300 fpm (15 – 137 m/min) infinitely variable with an inverter drive and heavy-duty worm gear transmission.
• Hydraulic Down Feed: Infinitely variable feed rate is hydraulically controlled for fast, accurate cutting, Settings are made at the operator’s control station.
• Hydraulic Frame Return: The saw frame is raised hydraulically using a push button mounted on the operator’s control panel.
• Vise Jaw: Hydraulic vise design clamps and holds the work piece securely. The vise is operated by a selector switch located on the operator’s control panel. Maximum vise opening is 18″
• Coolant System: Built in coolant system keeps your parts cool and increases blade life. (6 gallon coolant tank)
• Swivel: The saw frame swivels a full 60° to the rear and 45° to the front for optimum miter cutting capability. The pivot shaft has sealed bearings for maintenance free operation, while a pointer and angle scale (-60° TO + 45°) make setup fast and easy. Stops are provided at -60° and +45°.
• Operator’s Control Panel: Operation of the machine is safe and convenient from the swing arm pedestal mounted on the machine base. Control Voltage is 110V.
• Free Standing Control Console (Option): Replaces standard control console mounted to machine base with a free standing pedestal and flexible electrical and hydraulic lines.
• Variable Vise Pressure (Option): Hydraulic clamping pressure to the work holding jaws can be adjusted as required to hold solid or thin wall material.
• Free Standing Roller Table (Option): Table is constructed from 3″ x 4.1 lb./ft. channel with five 2.5″ diameter ball bearing rollers on 12″ centers and two track stands. Track sections can be used on either the loading or discharge side of the machine and are free standing.
