PMI-18 DB-TYPE FULLY AUTOMATIC UPCUT SAW
The PMI-18 DB-Type is a fully automatic upcut saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- 7.5 HP Saw Motor
- 90 Degree (Straight) Cut Saw
- 3200 RPM Saw Blade Speed
- Full Control of the Feed Rate – Air over Oil
- Touchscreen Control
- Servo Controlled Material Indexing
- Saw Head – Vertical and Horizontal Clamping
- Adjustable Clamping Pressure
- 18” Diameter Saw Blade
- 4.33” Maximum Height Capacity
- 11.81” Maximum Width Capacity
PMI-445 A-TYPE FULLY AUTOMATIC UPCUT SAW
The PMI-455 A-Type is a fully automatic upcut saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- 10 HP Saw Motor
- 90 Degree (Straight) Cut Saw
- 3200 RPM Saw Blade Speed
- Full Control of the Feed Rate – Fully Hydraulic
- Touchscreen Control
- Ballscrew/Servo Controlled Material Indexing
- Vertical and Horizontal Clamping – Bundle/Stack Cutting
- Adjustable Clamping Pressure
- 18” Diameter Saw Blade
- 4.33” Maximum Height Capacity
- 11.81” Maximum Width Capacity
PMI-610 A-TYPE FULLY AUTOMATIC UPCUT SAW
The PMI-610 A-Type is a fully automatic upcut saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- 10 HP Saw Motor
- 90 Degree (Straight) Cut Saw
- 2000 RPM Saw Blade Speed
- Full Control of the Feed Rate – Fully Hydraulic
- Touchscreen Control
- Ballscrew/Servo Controlled Material Indexing
- Vertical and Horizontal Clamping – Bundle/Stack Cutting
- Adjustable Clamping Pressure
- 24” Diameter Saw Blade
- 7.5” Maximum Height Capacity
- 16.5” Maximum Width Capacity
PMI-NC24 L-TYPE FULLY AUTOMATIC SAW
The PMI-NC24 L-Type is a fully automatic saw that is built and designed to cut aluminum extrusions, profiles, aluminums bars, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- 15 HP Saw Motor
- 90 Degree (Straight) Cut Saw
- Inverter Controlled, Infinitely Variable Saw Blade Speed – 1200 to 3600 RPM
- Full Control of the Feed Rate – Fully Hydraulic (servo controlled available as an option)
- Touchscreen Control
- Ballscrew/Servo Controlled Material Indexing
- Vertical and Horizontal Clamping – Bundle/Stack Cutting
- Saw Table Separation – No Material Re-Cut – Improved Surface Finish and Extended Blade Life
- Adjustable Clamping Pressure
- Maximum Saw Blade Size 24” Diameter
- 7.87” Maximum Height Capacity
- 15.75″ Maximum Width Capacity
PMI-NC30 L-TYPE FULLY AUTOMATIC SAW
The PMI-NC30 L-Type is a fully automatic saw that is built and designed to cut aluminum extrusions, profiles, aluminum bars, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- 20 HP Saw Motor
- 90 Degree (Straight) Cut Saw
- Inverter Controlled, Infinitely Variable Saw Blade Speed – 1000 to 3000 RPM
- Full Control of the Feed Rate – Fully Hydraulic (servo controlled available as an option)
- Touchscreen Control
- Ballscrew/Servo Controlled Material Indexing
- Vertical and Horizontal Clamping – Bundle/Stack Cutting
- Saw Table Separation – No Material Re-Cut – Improved Surface Finish and Extended Blade Life
- Adjustable Clamping Pressure
- Maximum Saw Blade Size 30” Diameter
- 10” Maximum Height Capacity
- 23.62” Maximum Width Capacity
PMI-NC36 L-TYPE FULLY AUTOMATIC SAW
The PMI-NC36 L-Type is a fully automatic saw that is built and designed to cut aluminum extrusions, profiles, aluminum bars, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- 20 HP Saw Motor
- 90 Degree (Straight) Cut Saw
- Inverter Controlled, Infinitely Variable Saw Blade Speed – 900 to 1500 RPM
- Full Control of the Feed Rate – Fully Hydraulic (servo controlled available as an option)
- Touchscreen Control
- Ballscrew/Servo Controlled Material Indexing
- Vertical and Horizontal Clamping – Bundle/Stack Cutting
- Saw Table Separation – No Material Re-Cut – Improved Surface Finish and Extended Blade Life
- Adjustable Clamping Pressure
- Maximum Saw Blade Size 36” Diameter
- 12.5” Maximum Height Capacity
- 23.62” Maximum Width Capacity
PMI-18 UPCUT SAW
The PMI-18 CNC Auto Upcut Saw is a fully automatic upcut saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- Fully Automatic Operation
- 7.5 HP Saw Motor
- 90 Degree (Straight) Cut Saw
- Built-in Automatic Pusher System – Servo Controlled
- Touchscreen Control
- 3600 RPM Saw Blade Speed
- Full Control of the Feed Rate – Air over Oil Feed System
- Vertical and Horizontal Clamping
- Adjustable Clamping Pressure
- 18” Diameter Saw Blade
- 4.33” Maximum Sawing Height
- 11.81″ Maximum Sawing Width
PMI-20 CNC AUTO MITER UPCUT SAW
The PMI-20 CNC Auto Miter Upcut Saw is a fully automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- Fully Automatic Operation
- 7.5 HP Saw Motor
- Servo Controlled, Powered Saw Head – 45 degrees to the left and right
- Built-in Automatic Pusher System – Servo Controlled
- Touchscreen Control
- 3000 RPM Saw Blade Speed
- Full Control of the Feed Rate – Air over Oil Feed System
- Vertical and Horizontal Clamping
- Adjustable Clamping Pressure
- 20” Diameter Saw Blade
- 5.9” Maximum Sawing Height
- 11″ Maximum Sawing Width
PMI-24 CNC AUTO UPCUT SAW
The PMI-24 CNC Auto Upcut Saw is a fully automatic upcut saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- Fully Automatic Operation
- 10 HP Saw Motor
- 90 Degree (Straight) Cut Saw
- Built-in Automatic Pusher System – Servo Controlled
- Touchscreen Control
- 2000 RPM Saw Blade Speed
- Full Control of the Feed Rate – Air over Oil Feed System
- Vertical and Horizontal Clamping
- Adjustable Clamping Pressure
- 24” Diameter Saw Blade
- 7.87” Maximum Sawing Height
- 16.5″ Maximum Sawing Width
PMI-20 24 CNC AUTO MITER UPCUT SAW
The PMI-20 24 CNC Auto Miter Upcut Saw is a fully automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- Fully Automatic Operation
- 7.5 HP Saw Motor
- Servo Controlled, Powered Saw Head Rotation – 60 degrees to the left and right
- Built-in Automatic Pusher System – Servo Controlled
- Operator Friendly Touchscreen Control
- 2000 RPM Saw Blade Speed
- Full Control of the Feed Rate – Air over Oil Feed System
- Vertical and Horizontal Clamping
- Adjustable Clamping Pressure
- 24” Diameter Saw Blade
- 7.87” Maximum Sawing Height
- 14.6” Maximum Sawing Width
PMI-20 30 CNC AUTO MITER UPCUT SAW
The PMI-20 30 CNC Auto Miter Upcut Saw is a fully automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- Fully Automatic Operation
- 10 HP Saw Motor
- Servo Controlled, Powered Saw Head Rotation – 60 degrees to the left and right
- Built-in Automatic Pusher System
- Touchscreen Control
- 1500 RPM Saw Blade Speed
- Full Control of the Feed Rate – Fully Hydraulic
- Vertical and Horizontal Clamping
- Adjustable Clamping Pressure
- 30” Diameter Saw Blade
- 9.8” Maximum Sawing Heigh
- 18.11” Maximum Sawing Width
PMI-20 36 CNC AUTO MITER UPCUT SAW
The PMI-20 36 CNC Auto Miter Upcut Saw is a fully automatic upcut miter saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- 10 HP Saw Motor
- Servo Controlled, Powered Saw Head Rotation – 60 degrees to the left and right
- Built-in Automatic Pusher System – Servo Controlled
- Touchscreen Control
- 1200 RPM Saw Blade Speed
- Full Control of the Feed Rate – Fully Hydraulic
- Vertical and Horizontal Clamping
- Adjustable Clamping Pressure
- 36” Diameter Saw Blade
- 12.6” Maximum Sawing Height
- 20.87” Maximum Sawing Width
PMI-T5S CNC COMPOUND AUTO MITER UPCUT SAW
The PMI-T5S CNC compound auto miter upcut saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- Fully Automatic Operation
- 7.5 HP Saw motor
- Compound Miter
- Rotation 45 degrees to left and 67.5 degrees to right
- Tilt 45 Degrees to Right
- Powered, Servo Driven Saw Head Rotation and Tilt
- Built-in Automatic Pusher System – Servo Controlled
- TouchScreen Control
- 2000 RPM Saw Blade Speed
- Full Control of the Feed Rate – Fully Hydraulic
- Vertical and Horizontal Clamping
- Adjustable Clamping Pressure
- 24” Diameter Saw Blade
- 7” Maximum Sawing Height (at 90 degrees)
- 16.9” Maximum Sawing Width (at 90 degrees)
