PMI-14 C-TYPE NOTCHING SAW
The PMI-14 C-Type is a semi-automatic notching saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- 3 HP Saw Motor (2)
- Two saw heads that are staggered and fixed at 45 degrees – notching
- 3200 RPM Saw Blade Speed
- Full Control of the Feed Rate – Air over Oil Feed System
- Vertical and Horizontal Clamping
- Adjustable Clamping Pressure
- 14” Diameter Saw Blade (2)
- Maximum Notch Size 5” x 5”
- Maximum Material Height 7.87”
PMI-14 CV-TYPE NOTCHING SAW
The PMI-14 CV-Type is a semi-automatic notching saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- 2 HP Saw Motor (2)
- Two saw heads Fixed at 45 degrees
- Adjustable Front Fence to adjust the depth of the notch
- 3200 RPM Saw Blade Speed
- Full Control of the Feed Rate – Air over Oil Feed System
- Vertical and Horizontal Clamping
- Adjustable Clamping Pressure
- 14” Diameter Saw Blade (2)
- Maximum Width 3.5”
- Maximum Material Height 7”
PMI-LJK 500NC NOTCHING SAW
The PMI-LJK500NC is notching saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- Equipped with Two Saw Heads
- Vertical Saw Blade 24” Diameter
- Horizontal Saw Blade 20” Diameter
- Each Saw Head can be Positioned +/- 45 degrees (Servo Controlled)
- 5 HP Saw Motor (2)
- 2800 RPM Saw Blade Speed
- Full Control of the Feed Rate – Air over Oil Cutting Control
- The Saw Table is Adjustable from +/- 45 degrees (Servo Controlled)
- Saw Heads 1 kW Servo (2)
- Work Table 1kW Servo
- Horizontal and Vertical Clamping
- Adjustable Clamping Pressure
- Cutting Depth 8.67” x 6.7”
PMI-LJK 600NC NOTCHING SAW
The PMI-LJK600NC is a notching saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- Equipped with Two Saw Heads
- Vertical Saw Blade 24” Diameter
- Horizontal Saw Blade 24” Diameter
- Each Saw Head can be Positioned +/- 45 degrees (Servo Controlled)
- 5 HP Saw Motor (2)
- 2800 RPM Saw Blade Speed
- Full Control of the Feed Rate – Air over Oil Cutting Control
- The Saw Table is Adjustable from +/- 45 degrees (Servo Controlled)
- Saw Heads 1 kW Servo (2)
- Work Table 1kW Servo
- Horizontal and Vertical Clamping
- Adjustable Clamping Pressure
- Cutting Depth 8.67” x 8.67”
PMI-CNC 4S 4-AXIS NOTCHING SAW SYSTEM
The PMI-CNC 4S is a 4-Axis notching saw that is built and designed to cut aluminum extrusions, profiles, and other non-ferrous materials (copper, brass, plastics).
Standard Features & Equipment
- 5 HP Saw Motor
- 3000 RPM Saw Blade Speed
- Full Control of the Feed Rate – Ballscrew/Servo Controlled (Z-Axis)
- X-Axis
- 15.75” Travel
- 1.3 kW Servo
- Y-Axis
- 15.75” Travel
- 1.3 kW Servo
- Z-Axis
- 23.62” Travel
- 2.9 kW Servo
- A-Axis (Saw Head Rotation)
- 360 degrees Travel
- 1.3 kW Servo
- Horizontal Clamping
- Adjustable Clamping Pressure
- 20” Diameter Saw Blade
- Cutting Depth 7” x 7”
