HYDRAULIC DOWN FEED
Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the best setting for the type of material being cut.
Marvel
PB 2022
PB 2022
CAPACITY: 20” X 22”, 20″ Round
FINANCING AVAILABLE!
heavy duty, well built cutting with the PB 2022
• Speed Range: Blade speeds are variable through a step pulley and a heavy duty Worm Gear Transmission. Blade speeds are 55, 80, 115, 150, 180, 215, and 250 SFPM. The broad speed range allows for optimum cutting of a large spectrum of materials.
• Weight Capacity: The machine’s weight capacity is 15,000 lbs. allowing cutting of solids and billets to the machine’s maximum capacity.
• Cut Indicator Light: The cut line indicator light is positioned on the dovetail above the blade and casts a shadow indicating the true cut line which aids in set-up and assures first cut accuracy.
• Heavy Duty Construction: The saw frame is constructed of 3/4” plate stock with an 8” square tube running across its top to prevent deflection when the blade is put under tension.
• Chip Brush: Powered from the main drive shaft of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance.
• Vise Jaws: The split vise jaws allow for clamping the work piece on both sides of the cut, reducing vibration to extend blade life and holding the material more secure for straighter cuts.
PB 2022
| CAPACITY: 90° | 20″ x 22″, 20″ Round |
|---|---|
| SPEED RANGE | Blade speeds are variable through a step pulley and a heavy duty Worm Gear Transmission. Blade speeds are 55, 80, 115, 150, 180, 215, and 250 SFPM. The broad speed range allows for optimum cutting of a large spectrum of materials. |
| BLADE | 16′ Long x 1-1/2″ Wide x .050″ Thick. One Welded-Edge Band Blade is furnished with each machine. |
| MOTORS | Blade Drive: 7-1/2 H.P. (11.25 kW), Hydraulic Pump Motor: 2 H.P. (2.25 kW), Coolant Pump Motor: 1/4 H.P. (.1875kW) |
PRODUCT SPECIFICATIONS
BLADE GUIDES
A combination of roller bearing and hydraulically actuated carbide blade guides assure the blade is held taut for fast, accurate cuts. The cast guide arms are positioned manually.
HEIGHT SELECTOR
To reduce the machine’s cycle time, the upward return of the saw frame can be limited through a variable height selector and can be set for 0-20”.
