HYDRAULIC DOWN FEED
Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the best setting for the type of material being cut.
• Speed Range: 50-250 FPM (15-75 m/min.) infinitely variable, driven by heavy-duty worm gear transmission and variable speed pulley.
• Blade Guides: A combination of roller bearing and hydraulic actuated carbide blade guides assures the blade is held taut for fast, accurate cuts. The cast iron Movable Guide Arm is positioned through an Electric Motor, than is Hydraulically Locked in position.
• Chip Brush: Independently Powered, the chip brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance.
• Height Selector: To reduce the machine’s cycle time, the upward return of the saw frame can be limited through a variable height selector and can be set from 0-52″.
• Stabilizer Bar: To reduce blade vibration upon entry into the work piece, a blade stabilizer bar is provided and aids in producing straighter cuts and helps to extend blade life by reducing blade vibration. Automatic Saw Frame Return and Depth Control are standard.
• Cut Indicator Light: The cut line indicator light is positioned on the dovetail above the blade and casts a shadow indicating the true cut line which aids in set-up and assures first cut accuracy.
• Weight Capacity: The machine’s weight capacity is 110,000 lbs. allowing cutting of solids and billets to the machine’s maximum capacity.
CAPACITY: 90° | 52″ x 63″, 52″ Round. (27-1/2″ Minimum Clamp Width) |
---|---|
SPEED RANGE | 50-250 FPM (15-75 m/min.) infinitely variable, driven by heavy-duty worm gear transmission and variable speed pulley. |
BLADE | 42′ 7-3/4″ Long x 3″ Wide x .063″ Thick. One Welded-Edge Band Blade is furnished with each machine. |
MOTORS | Blade Drive: 20 H.P., Hydraulic Pump: 5 H.P., Coolant Pump: 1/4 H.P. |
Feed rate and pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the best setting for the type of material being cut.
The 96-1/2″ (2450 mm) x 64-1/2″ (1636 mm) Heavy Duty Table moves the material into position to be sawed. The table moves at 6 feet per minute and has a travel length of 70-7/8″.
Column and blade tilt right and left of vertical; work always stationary. Manual tilt standard with Sure-Lock and Built-in protractor. Electric Power tilts optional.
One set of full stroking vise jaws assure that even the largest piece of material will be held securely, while cutting reducing cutting vibration and providing better blade life. A second set of full stroke vise jaws are available as an option.